CyberPower CP1500AVRLCD3 Intelligent LCD UPS System, 1500VA/900W, 12 Outlets, 2 USB Ports, AVR, Mini Tower, Black

The CyberPower CP1500AVRLCD3 Intelligent LCD UPS System (1500VA/900W, 12 Outlets, 2 USB Ports, AVR, Mini Tower, Black) is an exceptional uninterruptible power supply (UPS) for protecting electronics from power outages, surges, and voltage fluctuations. For my home office setup, including a desktop PC, monitors, and networking gear, this unit has delivered outstanding performance, easy setup, and quiet operation, making it a top choice for reliable power management.Packaging and SetupThe UPS arrived securely packaged, with the unit, 6-foot power cord, USB cable, and manual well-protected against damage. Setup was seamless, taking about 10 minutes. I plugged the UPS into a grounded outlet, connected devices to the 12 NEMA 5-15R outlets (six battery/surge-protected, six surge-only), and powered it on. The PowerPanel Personal Edition software (downloadable) installed effortlessly on my PC for detailed monitoring and customization. The two USB ports (Type-A and Type-C) were a welcome addition, allowing me to charge my phone and tablet directly from the unit.Design and Build QualityThe mini-tower design (23.8 lbs, 10.2”H x 3.9”W x 13.7”D) is compact and sturdy, fitting neatly under my desk. The multifunction LCD panel is a highlight, providing clear, color-coded data on load capacity, battery status, and runtime (green for normal, yellow for warning, red for faults). The Automatic Voltage Regulation (AVR) stabilizes minor power fluctuations without draining the battery, a crucial feature in my area with occasional brownouts. The unit’s simulated sine wave output works perfectly with my non-PFC power supply devices, and the durable black finish blends seamlessly into my office. Notably, the unit is very quiet, with no noticeable fan noise, even during battery operation, making it ideal for noise-sensitive environments.PerformanceThe CP1500AVRLCD3 performed flawlessly from the start. I connected my desktop PC (estimated 300W load), a 27” monitor, router, and external hard drive to the battery/surge outlets, with printers and speakers on surge-only outlets. During a simulated power outage (unplugging the unit), it switched to battery power instantly, providing about 25 minutes of runtime at 350W—plenty for safe shutdowns. The AVR handled minor voltage dips effectively, preserving battery life. The LCD’s runtime estimates were spot-on, and the USB ports provided consistent charging. The unit’s self-test function (run on startup) confirms ongoing reliability, and I’ve had no issues despite frequent use. The three-year warranty and $500,000 Connected Equipment Guarantee add significant confidence.ProsEasy setup: Configures in minutes with user-friendly software.Informative LCD: Real-time, clear power and battery status display.Quiet operation: No noticeable fan noise, perfect for home offices.Ample outlets: 12 outlets (six battery/surge, six surge-only) for multiple devices.AVR functionality: Stabilizes voltage, extending battery life.ConsWeight: At 23.8 lbs, it’s not easily portable.Cord length: 6-foot power cord may require an extension in some setups.ConclusionThe CyberPower CP1500AVRLCD3 is a dependable, quiet, and feature-packed UPS for home offices or small setups needing robust power protection. Its straightforward setup, detailed LCD, silent operation, and AVR make it ideal for managing outages and fluctuations, while the USB ports and numerous outlets add versatility. Though slightly heavy, its performance and reliability make it a standout. Highly recommended for safeguarding electronics and ensuring data protection.

Bought this to replace my 5 year old APC battery UPC after a thunderstorm surge power that fried it.This product is just about the same size and shape as my APC one, but quite noticeably lighter, though still is pretty heavy as expected from a battery backup.Due to inflation over the last 5 years, I spent the same amount of money on this as I did on the APC, but an APC with the same features and quality today is easily ~$100 more and there is absolutely no compromise with the quality.This one also offers 2 more plugs in it (one one battery, one only surge protection). Also, I'm sure this has to do with the age of the battery on the older APC, but the eta on battery lasting under same load is much longer. Of course, I only need it to last long enough to properly shut everything down during extended power losses. I haven't had any power outages since the incident in order to put that to the test though.All in all, for the price point, this is a very good value and offers just as good, if not better quality and I couldn't be happier with this purchase and am confident my electronics will be safe.

Use case: remotely communicate with my security system when the power goes out. Just my router, fiber modem, camera and house temp sensors are on battery backup. Higher power appliances like a Roku, TiVo and OLED TV are on surge only. This gives me 450 minutes of battery power to remote monitor my security system which has its own 24 hour battery backup. System super easy to setup, only needed 4/4 outlets but glad there were 6/6 as some power bricks blocked unused outlets. Fits perfectly between wall and console, discreet as it should be.

Overview:- Apparent re-boxing- Low multimeter readings- PowerPanel SoftwareAPPARENT RE-BOXING-- So, first thing I noticed when I got this unit is that it had been re-boxed at some point. This should not be the case, because Amazon informed me this is a NEW PRODUCT. However, it was clear the tape on the LCD screen and the tape on the unit's own box had been removed and replaced at some point, leading me to think someone at Amazon Fulfillment had opened the box.That wouldn't be the first time Amazon has sent me not-quite-new items. I bought a keyboard that had scratches on the INSIDE of it, as well as a motherboard that was missing pieces. You get the idea.That is not, however, a fault of the unit, nor the company CyberPower.-- I will add that I was under the impression batteries were to be stored and shipped in a non-full state. That is NOT the case with CyberPower's units, and the batteries come fully charged, and should be stored fully charged.LOW MULTIMETER READINGS-- Due to believing this UPS unit was not brand new as Amazon had assured me, as well as having read reviews about low voltage output, I decided to put my accurate but 40-year-old multimeter to the test.Now, there is something you have to understand about multimeters, and I'm going to make this as easy to understand as I can, without myself being an expert.WARNING: Anyone who knows the proper terms and complexities of electricity, I am about to make you wince with my explanation!Now, moving on...There are two kinds of multimeter these days, to my knowledge. Average-Responding multimeters, and True-RMS multimeters.An alternating current (henceforth known as AC) typically runs as a wavy line, called a sine wave. It's very symmetrical-looking.But AC, when being interacted with by certain things, say a CyberPower power supply unit, will produce non-sine waves. What that means, is the wavy line suddenly doesn't look as smooth and symmetrical as it does in other places. But it can still carry the same voltage.This confuses your typical Average-Responding multimeter, and it spits out an inaccurate number, one that is typically lower.A True-RMS multimeter can take the numbers from even non-sine waves, which is what this unit produces, and give you an ACCURATE voltage.-- In short: I plugged my 40-year-old multimeter into the unit, it read 91.8v, and I contacted customer support. The tech told me I needed a True-RMS meter. I had NO IDEA what that meant, the tech didn't explain (fair enough), so I ended up having to learn it on my own. Now I know that the unit is fine, and not actually running a low voltage- my multimeter just isn't fancy enough.POWERPANEL SOFTWARE-- Alright, so I'm actually quite fond of this piece of software. I won't go into great detail, but I'll give some examples: the software allows you to monitor how many watts you're using, how long the battery will run should the power go out, and events that have occurred. It also lets you enable or disable the alarms, monitor how much you're spending on what's plugged into the unit based on your local power company's kWh rate, as well as giving you the ability to schedule when the computer should shut down.There's a fair bit more to the software, but that would take a bit too long.